
Changsha U1 Technology Co., Ltd.
With an experienced & qualified team of professionals, we provide superior, reliable & sustainable custom-made solutions

Natural Gas Engine For Gensets From Evo
Engine Model:1004NG, 1006NG, 1006-G6TAG Cyl.No.:4-Cyl. 6-Cyl. Displacement(L):3.99 , 5.98 Engine Prime Power: (kW/1500rpm):30-90 (kW/1800rpm):36-100 1800rpm:36-100kW Engine Standby Power: (kW/1500rpm):33-99 (kW/1800rpm):30-110 Generator Prime Power:

| Engine Model | 1004NG | 1006NG | 1006-G6TAG | |
| E4α 100 Series | E6α 100 Series | |||
| Cyl.No. | 4-Cyl. | 6-Cyl. | 6-Cyl. | |
| Induction System | NA | NA | T | |
| Displacement(L) | 3.99 | 5.98 | 5.98 | |
| Bore×Stroke(mm) | 100×127 | 100×127 | 100×127 | |
Engine Prime Power | kW/1500rpm | 30 | 50 | 90 |
| kW/1800rpm | 36 | 60 | 100 | |
Engine Standby Power | kW/1500rpm | 33 | 55 | 99 |
| kW/1800rpm | 39 | 66 | 110 | |
| Governor Type | Electronic | |||
| Electrical System | 12V | 12V | 12V/24V | |
| Engine Net Weight(KG) | 520 | 670 | 710 | |
| Engine Overall Size (mm) | 1275*735*938 | 1546*759*1106 | 1632*811*1043 | |
| Flywheel/Flywheel Housing | SAE3/11.5" | |||
Generator Prime Power | kW/1500rpm | 27 | 45 | 80 |
| kW/1800rpm | 32.4 | 54 | 90 | |
Requirement for Natural gas 1.Methane should be at least 95% 2.The natural gas temprature should be between 0-60℃ 3.No inpurity should be in the gas.Water in the gas should be less than 20g/Nm3. 4.Heat value should be at least 5500kcal/m3, if less than this value, the power of the engine will be declined. 5.Gas pressure should be 3-100KPa, if the pressure is less than 3KPa, booster fan is necessary. 6.The gas should be dehydrated and deulfurated. Make sure that there is no liquid in the gas, H2S<200mg/Nm3 |
Related Products
CONTACT US
Contact US
×Support order samples, customization, wholesale direct, and complete payment. If the product you look for does not have corresponding customized content, pls fill out the form below to contact us, and we will reply ASAP.

.webp)
.webp)
.webp)
.webp)
.webp)






